Skip to main content

Resources

Links to things:


Halloween Techniques:

Projection Mapping:

Video Sources
Software

Comments

Post a Comment

Popular posts from this blog

First Synchronized Video Produced for 2021

With the plan to use DMX synchronized video projections and lighting controllers, I have been getting busy with the setup for the 2021 Halloween display. This includes making sure the DMX hardware I have actually works and producing video content for the display. I feel that once I confirm the hardware will work, getting the hardware setup should be uneventful. The synchronized videos will require a lot more work, especially since I want to produce an hour long show (in order to not repeat the same scenes too often). I settled on four large video projectors for this season, but I know only where three of them are positioned. Figuring out where the fourth projector goes is eluding me and causing a little angst. I haven't tested the DMX controllers with the media players yet. I'm planning on testing them this weekend. This includes getting a DMX interface from the computer to the universe to work as well as sequencing software. I still have my Lynx USB-to-DMX interface but haven...
Post a Comment
Read more

2020 Halloween Technology Updated

I've been thinking about the technical work required to create a multi-projector synchronized display. A previous post on the 2020 plan outlined some technologies to put together to make it happen. And, it was possible, albeit, time-consuming. I revisited a project that I hadn't looked too closely at before. Actually, until two years ago, it wouldn't have had the features that interested me, but it does now. It's called the Sprite Video Player by MedeaWiz and it's quite remarkable. But basically, you can load it with video and sound files and remotely command it to play a file on demand. It even works with DMX. That got me thinking about other DMX elements in the display, like lights and fog, and how I would conduct the various animations and scenes. The simple answer came from the fact that I already have some DMX components, including a USB-to-DMX connector and DMX lighting controllers. I can use a computer running either Vixen Lights or XLights and programmed seq...
Post a Comment
Read more

Sprite DMX Control Confirmed

I spent the day digging through my old DIY DMX projects and piecing together a system in order to test the Sprite DMX controller. It's best to explain as a series of tasks: Locate my Lynx DMX Dongle and install the FTDI/Virtual Comm Port drivers on my laptop (I'll use an older laptop later) Dust off my Lynx Express 16 channel AC controller to test the DMX dongle as well as finding the DMX-wired RJ-45 cables for doing so Figure out the RJ-45 to DMX signal wiring fron the Lynx Dongle Wire up the Sprite DMX module Find a suitable computer based DMX sequencer and figure out how to use it (a lot harder than I expected) Put it all together and make it work (my wife thought I was doing something useful) With the exception of spending about two hours trying to find the two tiny Sprite DMX controllers that I purchased last year (they weren't where I thought they'd be), most of my time was spent finding a suitable and easy-to-learn computer application for controlling the darn th...
Post a Comment
Read more